Tile floors lose their shine due to masking by stains, dirt and dust spread over it by the footwear. Even though many people use wax to shine tile floors, there are other ways to shine tile floors without wax. Below are some of the do-it-yourself means of making floor tiles shine without wax. A mixture of soap and warm water can be of great help in this process. To make your soapy solution, you should add detergent into a mop bucket containing warm water and mix thoroughly to form a soapy solution.
Once the solution is ready, you need a mop to apply the soapy solution in the following procedure. Baking soda may be useful in cleaning stains on the tile floor. The baking soda is one of the best cleaners that work well on stains and dirt.
All you will have to do is to make your soda cleaning solution using the following procedure:. Ammonia is one of the best floor cleaners with remarkable result in removing floor stains and restoring the shine on floor tiles. You can add a few drops of ammonia into warm water in a mop bucket and mix well. After that, dip the mop into the cleaning solution and wring thoroughly to avoid excessive application of the cleaning solution.
Thoroughly mop the floor, removing stains, dirt and disinfecting the floor at the same time. In case of persistent stains, use a sponge soaked with the cleaning solution and scrub the stains gently.
After cleaning with ammonia solution, you should rinse the floor adequately with freshwater and dry-mop the floor. Vinegar provides a natural tile cleaning solution that is effective for both cleaning the soil and disinfecting the floor. When the vinegar dries up, it leaves a natural scent on the floor that makes the room smell fresh. Ensure the floor is swept clean before using the vinegar solution. The following steps will guide you on how to make a vinegar solution for cleaning floor tiles.
If you have grease on your tile floor, using ammonia is perfect. When you need a little more punch, you can add some vinegar and rubbing alcohol. Mix together and mop or spray onto the floor. Be careful scrubbing this solution too much, as the dish soap can cause a lot of suds. In some ways, this solution combines the best parts of the vinegar and the ammonia. The borax works as a powerful disinfectant, and also helps to tie the vinegar and ammonia together into a complete cleaning solution.
Mop the solution onto the floors, and scrub where necessary. While it might be tempting, its best not to polish or buff your tile floors. Your ceramic or porcelain floors have already been glazed by their manufacturer. If you polish or buff them, you risk hurting what the manufacturer has already placed on it.
Its the same concept as if you had painted your tile. Cleaning agents like bleach, ammonia, or any acid based cleaner can be very damaging for your tile floor. Again, your ceramic or porcelain tile is hardened clay that is porous, and acid can work its way into the tile and deteriorate it. Hard bristle brushes can scratch your tile, ruining its appearance and making it more susceptible to long term damage.
In a similar fashion, steel wool can have the same effect. However, steel wool can also leave damaging bits of steel in your tile, which can rust down the road. One of the best ways to keep tile shining is to clean it regularly. Lightly cleaning your tile several times per week is actually the best case, but once per week will suffice. Marks and scuffs can prevent your tile from shining as much as you want it to.
These scuffs come from dirt and debris being routinely tracked over your tile. Not only does it dull its appearance, but it causes scratching. While you can always clean and buff out these scuffs, here are a few tips to reduce the marks that can happen to your tile:. It can be tough to put mats down on top of your beautiful tile, and can seem a little counter-intuitive. However, for high traffic areas, it is a good idea.
You can always roll the mats up for parties and events. Not regularly cleaning your tile can lead to a damaged countertop, wall, or floor, depending on where you installed tile in your home and how much grime build-up it has.
Hopefully, with the help of this guide, you will learn how to shine ceramic tile and porcelain tile. You need to clean your grout as well. Good luck and happy cleaning! An expert at home repair, remodel, and DIY projects for nearly 40 years. Tile industry trade organizations advise that the proper way to maintain the shine on ceramic tile is through correct cleaning techniques, not wax, finishes or sealer.
These substances often produce a dulling effect on lustrous glazed ceramic tile. Proper use of the appropriate cleaners restores the natural shine that makes ceramic tile an important contributor to the aesthetics of a room. Dilute a commercially available alkaline cleaning solution formulated for tile with water according to the ratio recommended by the manufacturer.
Use the hottest tap water available to dilute the cleaner. Use a sponge mop to apply the hot cleaning solution to the ceramic tile in liberal amounts. Allow the hot cleaning solution to stand on the tile for 20 minutes. Lightly scrub the tiles and the grout between the tiles by hand with a stiff brush or plastic scrub pad.
0コメント